SoC 白盒IP设计

Visit us at MWC

Feb 25 - 28 Barcelona

MIPI CSI2 Tx Controller IP


The MIPI Camera Serial Interface 2 (CSI-2) is an interface between a Camera and a host processor baseband application engine. This interface is defined by MIPI Alliance, which defines a series of modules in a MIPI compliant product.

The MIPI CSI-2 Transmitter is used in mobile and high– speed serial applications as a controller for transmitting camera video and receiving camera commands to/from MIPI CSI-2 Receiver over MIPI lines. The camera data is encoded and then transmitted. The MIPI CSI-2 Transmitter along with our MIPI CSI-2 Receiver and MIPI DPHY provides a complete solution for decoding MIPI CSI-2 data.


      • Compliant with MIPI CSI-2 Spec v1.1 and MIPI D-PHY Spec v1.1
      • Max 1.5 Gbps data transfer rate per Data Lane of DPHY
      • Programmable 1, 2 or 4 Data Lane Configuration.
      • Operate in continuous and non-continuous clock modes.
      • Command and Video Mode are supported.
      • Burst and Non-Burst modes are supported.
      • Video Packet Formats:YUV-422 8-bit, RGB-888, RGB-565, RAW-8, RAW-10 and RAW-12
      • Camera Interface: 8, 16 and 24 bpp
      • Progressive Scanning


        • Silicon Proven
        • Highly Modular and Scalable Design
        • Active Low Asynchronous Reset


        • RTL Code
        • Verification Environments
        • Test suites
        • Synthesis Environment and Scripts
        • Design Guide
        • Verification Guide
        • Synthesis Guide

T2M提供高质量的已验证IP,包括各种模拟/混合信号,RF,数字和SW系统的解决方案。可用于通信,消费类电子和计算机产品的关键组成部分,包括IoT系统,可穿戴设备,蜂窝电话,平板电脑,M2M,RCU,机顶盒,电视机,DVD播放器和PC芯片组。 无论是fab工厂的工艺 /节点的移植还是特定的系统功能,T2M所提供的IP可以进行设计定制化修改以适合客户的具体要求。