SoC White Box IPs

Visit us at Bluetooth World

Sep 18 -19

GPS 8001 BT, Beidou, RF IC IP

개요특징Datasheet 요청하기


The 8001 is a fully integrated single RF transceiver designed for Bluetooth, GPS and Beidou. The chip includes a fully integrated receiver path, transmit path, frequency synthesizer, programmable gain-controlled analog baseband and standard digital interface. It is compliant with Bluetooth 2.1+EDR , Bluetooth 3.0 and Bluetooth 4.0 with low power digital direct modulation TX path and linear IQ TX path. A integrated PA delivers up to + 4dBm (Class 2). For GNSS reception, the configurable core can receive the traditional GPS L1/Galileo E1 (1575.42MHz) as well as the GLONASS G1 (1603.5MHz), and Compass B1-1 (1561.098MHz) and B1-2 bands (1589.792MHz). A configurable analog baseband filter and versatile fractional PLL allows dual band reception of GPS/Galileo and Beidou or GPS/Galileo and GLONASS.


  • Low-IF receiver with complex bandpass filter for Bluetooth RX
  • Low-Power digital modulation and IQ direct conversion TX architecture
  • Fast-lock PLL supporting Bluetooth frequency hopping
  • On-chip DC-offset cancellation and image rejection calibration circuitry
  • Integrated PA delivering up to +4dBm with connection for external PA
  • 70dB dynamic range RSSI
  • Fully integrated fractional-N synthesizer with low phase noise VCO
  • Supporting a wide range of low cost crystal from 10MHz-52MHz
  • IF gain settings can be digitally controlled by SPI or controlled by filtered analog voltage of PWM signal generated by the baseband.
  • 3-wire serial interface
  • Single 2.7V to 3.6V power supply with integrated 1.8V regulation
  • Low current consumption: 30/35mA for Bluetooth RX/TX and 20mA for GPS/Beidou
  • TSMC 180 CMOS
  • Small QFN-48 package
  • Deliverables

  • Pakaged Devices
  • KGD – Konown Good Die
  • GDSII – silicon IP
  • Ported to any fab/node
다음 양식을 작성하고받은 편지함에 제품 데이터 시트를 가져 오십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.