SoC White Box IPs

BLE 5/ZigBee 3 RF IP

개요특징Datasheet 요청하기

Description

The icyTRX ultra-low- power RF transceiver is designed to meet standards such as Bluetooth Low Energy (Bluetooth Smart), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data-rates from 62.5 kBit/s up to 4 Mbit/s. icyTRX offers less than 5.5mW consumption in receive mode from a 1.0V supply. icyTRX is a complete transceiver that is designed for miniaturization, yielding a die size of less than 1.6 mm2 in 55 nm CMOS, requiring minimal external components thanks to high degree of integration. icyTRX is designed for easy integration into ASICs and SoCs. Available under license as an embedded IP block for integration in CMOS SoCs and ASICs. This is a mature, production proven RF IP. 

Samples and development kits are available

1470035787ble5-0

Features

    • Exceeds BLE v5 and ZigBee v3 requirements: 2MBPS, Long Range
    • Power Consumption:
    • 1V to 1.3V (functional down to 0.9V)
    • RX current: 5.3 mA (@1 MBit/s)
    • TX current: 8.6 mA (@ 1 dBm)
    • Bluetooth 5 sensitivity:
    • -94 dBm at 2 Mbit/s
    • -97 dBm at 1 Mbit/s (4x)
    • -105 dBm at 125 kbit/s (Long Range S=8)
    • -101 dBm at 500 kbit/s (Long Range S=2)
    • No calibration needed, ultra fast settling
    • Single Rx and Tx port
    • Fully integrated FSK-based modem, with
    • programmable pulse shape, data rate and modulation index
    • Partial Link layer functionalities, including :automatic packet handling, CRC, AES-CCM, separate Rx and Tx FIFOs
    • Proprietary modes with adjustable bitrate from 62.5 kBit/s up to 4 Mbit/s
    • Pre-integrated with ARM, CEVA, Mindtree
    • Silicon area <1.6 mm (55 nm CMOS)

Applications

    • Wearable sensors
    • Wireless sensor networks
    • Smart watches+fitness bands

Availability

    • GDSII: TSMC55 ULP FLASH, GF55 ULP
    • Samples and EVKs available

밑의 서식을 작성해주십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.