SoC White Box IPs

Visit us at Electronica

Nov 13-16 Munich

MIPI CSI2 Rx Controller IP

개요특징Datasheet 요청하기

The MIPI Camera Serial Interface 2 (CSI-2) is an interface between a Camera and a host processor baseband application engine. This interface is defined by MIPI Alliance, which defines a series of modules in a MIPI compliant product.

This MIPI CSI-2 Receiver is used in mobile and high–speed serial applications as a controller for receiving camera video and transmitting camera commands from/to MIPI CSI-2 Transmitter over MIPI lines. The camera data is encoded and then transmitted. The MIPI CSI-2 Transmitter along with our MIPI CSI-2 Receiver and MIPI DPHY provides a complete solution for decoding MIPI CSI-2 data.


    • Compliant with MIPI CSI-2 Spec v1.1 and MIPI D-PHY Spec v1.1
    • Max 1.5 Gbps data transfer rate per Data Lane of DPHY
    • Programmable 1, 2 or 4 Data Lane Configuration.
    • Operate in continuous and non-continuous clock modes.
    • Command and Video Mode are supported.
    • Burst and Non-Burst modes are supported.
    • Video Packet Formats:YUV-422 8-bit, RGB-888, RGB-565, RAW-8, RAW-10 and RAW-12
    • Camera Interface: 8, 16 and 24 bpp
    • Progressive Scanning


      • Silicon Proven
      • Highly Modular and Scalable Design
      • Active Low Asynchronous Reset


        • RTL Code
        • Verification Environments
        • Test suites
        • Synthesis Environment and Scripts
        • Design Guide
        • Verification Guide
        • Synthesis Guide
다음 양식을 작성하고받은 편지함에 제품 데이터 시트를 가져 오십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.