SoC White Box IPs

Visit us at Electronica

Nov 13-16 Munich

MIPI CSI 3 Device Controller IP

개요특징Datasheet 요청하기

Description

The MIPI Camera Serial Interface 3 (CSI-3) is an interface between a Camera and a host processor baseband application engine. This interface, defined by MIPI Alliance, uses Unipro and MPHY for Link and PHY layers respectively. CSI-3 Host is the command decoding and pixel encoding logic between the Camera and UniPro.
GDA’s CSI-3 Device IP supports two C-Ports for pixel data and one C-Port for attribute transfer. In the CSI-3 Device, the pixel data from Camera is subsequently processed before being sent upstream to UniPro. The control flow, being opposite to data flow, is initiated by the application processor, to configure UniPro, and MPHYs downstream in both Host and Device sides, and also CSI-3 Device. The GDA MIPI CSI-3 Device along with GDA MIPI UniPro, MPHY and GDA MIPI CSI-3 Host provide a complete solution for a camera application.

Features

  • Compliant with MIPI CSI-3 Spec v1.0
  • 1 C-port for CPC and 2 C-ports for Pixel/Embedded Data
  • CPC GET/SET/Notify/Response PDU Supported.
  • Mandatory Gettable/settable properties of all attributes.
  • End-to-end Support for CPC Packets.
  • Round Robin arbitration for multiple VCIDs.
  • TX Buffer Overflow Management
  • Preemptive frame handling
  • Embedded data during Vertical Blanking period supported
  • 2 source pixel data interleaving
  • Benefits

  • FPGA Validation
  • Highly Modular and Scalable Design
  • Active Low Asynchronous Reset
  • Deliverables

  • RTL Code
  • Verification Environments
  • Test suites
  • Synthesis Environment and Scripts
  • Design Guide
  • Verification Guide
  • Synthesis Guide
다음 양식을 작성하고받은 편지함에 제품 데이터 시트를 가져 오십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.