Select Language

SoC White Box IPs

ZigBee Sub1 Ghz 802.15.4 RF IP

개요특징Datasheet 요청하기

Description

This IP is a fully integrated system-on-chip radio transceiver targeting Smart Grid applications. The performance is tailored for extremely low power operation to be used in sensor monitoring networks and remote control for wireless networks. Transmitter output power ranges from -8 to +15 dBm, while receiver sensitivity is -110 dBm at 25kbps data rate.

Additional peripherals such as ADC, SPI, I2C, UART, I2S and timers are all included on the same chip, resulting in a compact system solution.This is ideal for portable applications in frequency ranges 863-928 MHz , in particular those needing long battery life and/or signal processing, such as AMR, WSN and medical.

Features

  • Ultra-low power 863-928 MHz transceiver
  • Low voltage operation from 3.6 V down to 1.0? V
  • Minimum current standby mode with RTC based on 32 ?kiHz crystal oscillator: 1? µA at 37?°C
  • Low continuous Rx current: 3.5 mA (1 ?V)
  • RF data rate up to 400 kb/s
  • Rx sensitivity -110 dBm at 25 kb/s in FSK modulation, -115 dBm at 2 kb/s in OOK modulation
  • Digital RSSI: 3 dB/step from noise level up to -30 dBm
  • Flexible modulation: FSK, OOK, 2-FSK, 4-FSK, QPSK
  • 16/32-bit DSP/CPU, 120 µA/MHz, dual MAC
  • Software development kit: gcc, gdb, ISS, Eclipse
  • 96 kiB low leakage SRAM (program and data)
  • Integrated ADC (10 kS/s), power management, LED current sources
  • Standard digital interfaces: SPI, UART, I2C, I2S and GPIO
  • ETSI EN300-220 V2.2.2 and FCC part 15.247 and 15.249 compliant
  • Applications

  • Automatic Meter Reading (AMR)
  • Wireless Sensor Networks (WSN)
  • Medical and Body Area Networks (BAN)
  • Home automation
  • Deliverables

  • Samples and evaluation kits are available
  • Packaging options: bare die or QFN
  • Derivatives custom requirements

밑의 서식을 작성해주십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.