SoC White Box IPs

Visit us at Bluetooth Asia

May 23 - 24 Shenzhen


개요특징Datasheet 요청하기


This is a SLIC device specifically designed for wireless local loop (WLL) and ISDN terminal adaptors (ISDN-TA) and VoIP applications. One of the distinctive characteristic of this device is the ability to operate with a single supply voltage (from 5.5 V to 12 V) and self generate the negative battery by means of an on chip DC/DC converter controller that drives an external MOS switch.

The battery level is properly adjusted depending on the operating mode. A useful characteristic forthese applications is the integrated ringing GENERATOR.

The control interface is a parallel type with open drain output and 3.3 V logic levels. Constant current feed can be set from 20 mA to 40 mA. Off-hook detection threshold is programmable from 5 mA to 9 mA.

The metering pulses are generated on chip starting from two logic signals (0 and 3.3 V) one define the metering pulse frequency and the other the metering pulse duration. An on chip circuit then provides the proper shaping and filtering. Metering pulse amplitude and shaping (rising and decay time) can be programmed by external components. A dedicated cancellation circuit avoid possible codec input saturation due to metering pulse echo.


  • Monochip subscriber line interface circuit (SLIC) optimised for WLL and VoIP applications
  • Implement all key features of the BORSHT function
  • Single supply (5.5 V to 12 V)
  • Built in DC/DC converter controller
  • Soft battery reversal with programmable transition time.
  • On-hook transmission.
  • Programmable off-hook detector threshold
  • Metering pulse generation and filter
  • Integrated ringing
  • Integrated ring trip
  • Parallel control interface (3.3 V logic level)
  • Programmable constant current feed
  • Surface mount package
  • Integrated thermal protection
  • Dual gain value option
  • BCD III S, 90 V technology
  • -40 to +85 °C operating range
  • Deliverables

  • Configurable RTL Code
  • HDL based test bench and behavioral models
  • Test cases
  • Protocol checkers, bus watchers and performance monitors
  • Configurable synthesis shell
  • Documentation
  • Design Guide
  • Verification Guide
  • Synthesis Guide
다음 양식을 작성하고받은 편지함에 제품 데이터 시트를 가져 오십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.