SoC White Box IPs

Visit us at Bluetooth Asia

May 23 - 24 Shenzhen

802.11 N/G/B 2.4GHz RF Transceiver IP

개요특징Datasheet 요청하기

75xx IPs are fully integrated 1×1 RF transceiver IPs for 2.4GHz 802.11bgn applications. They include the receiver, transmitter, Frac-N frequency synthesizer and LO chain, and all the supporting blocks such as bias and SPI.

The zero-IF receive path (RX) has very high dynamic. A zero-IF TX generates low EVM signals through the integrated PA. A fully integrated Frac-N frequency synthesizer generates and the LOCHAIN generates required low-phase-noise LO signals for TX and RX mixer. RF switch and balun (optional) are also integrated for lowest cost solution.

We also offer a range of other RF Transceiver IP for Wi-Fi, WCDMA, LTE, GNSS and others. These ultra-low-power RF transceiver IPs enable Internet-of-Things (IoT) and Machine-to-Machine (M2M) applications.


    • Fully integrated RF transceiver IP
    • 802.11 N/G/B 2.4GHz 1×1
    • Integrated PA, Balun, LNA, Switch
    • Very small die area
    • 1.65mm²
    • Very Low Rx Power consumption
    • ~ 25mw
    • Direct‐conversion receiver architecture
    • RX has great dynamic range
    • Low phase‐noise fractional‐N PLL
    • Very low EVM transmitter
    • Easily scalable to for MIMO configurations
    • Supports DPD
    • Dual supplies:
    • 1.2V and 3.3V
    • Optional Integrated ADC/DAC
    • Process:
    • SMIC 55nm, Flash, 1P6M
    • Can be ported to other processes


    • Wi‐Fi 802.11 B/G/N
다음 양식을 작성하고받은 편지함에 제품 데이터 시트를 가져 오십시오

T2M의 높은 퀄리티의 사전실증된 아날로그/혼합 시그널, RF, Digital and SW 시스템 해결책은 통신, 소비자와 컴퓨터 제품(IoT, Wearables, 핸드폰, 타블랫, M2M, RCU, set-top boxes, TV, 디비디 플레이어, PC 칩셋등)에 중요한 빌딩 블록으로 사용됩니다. IP는 소비자의 구체적인 요구조건에 따라fab/node 이식이나 전매 특징들을 수정할수 있습니다.