Select Language

SoC White Box IPs

UART IP

OverviewFeaturesRequest Datasheet

Description

The DUART is one of the tiniest UART IP Cores available on the market.

The DUART is a soft core of a Universal Asynchronous Receiver/Transmitter (UART). It performs serial-to-parallel conversion on data characters received from a peripheral device or a MODEM, and parallel-to-serial conversion on data characters received from the CPU. The CPU can read the complete status of the UART at any time during the functional operation. Status information reported includes the type and condition of the transfer operations being performed by the UART, as well as any error conditions (overrun, framing). The DμART includes a programmable baud rate generator that is capable of dividing the timing reference clock input by divisors of 1 to (216-1), and producing a 16 × clock for driving the internal transmitter logic. Provisions are also included to use this 16 × clock to drive the receiver logic. The DμART has processor-interrupt system. Interrupts can be programmed to the user's requirements, minimizing the computing required to handle the communications link.

The core is perfect for applications, where the UART Core and microcontroller are clocked by the same clock signal and are implemented inside the same ASIC or FPGA chip, as well as for standalone implementation, where several UARTs are required to be implemented inside a single chip, and driven by some off-chip devices.

Features

  • Majority Voting Logic
  • Adds or deletes standard asynchronous communication bits (start, stop, and parity) to or from the serial data
  • In UART mode receiver and transmitter are double buffered to eliminate the need for precise synchronization between the CPU and serial data
  • Independently controlled transmit, receive, line status, and data set interrupts
  • 16 bit programmable baud generator
  • False start bit detection
  • Line break generation and detection. Internal diagnostic capabilities:
  • Loop-back controls for communications link fault isolation
  • Overrun, framing error detection
  • Full prioritized interrupt system controls
  • Technology independent HDL Source Code
  • Fully synthesizable static design with no internal tri-state buffers

Benefits

  • D-UART

Applications

  • Serial Data communications applications
  • Modem interface
  • Embedded microprocessor boards

Deliverables

  • Source code:
  • VHDL Source Code or/and
  • VERILOG Source Code or/and
  • Encrypted, or plain text EDIF
  • VHDL & VERILOG test bench environment
  • Active-HDL automatic simulation macros
  • ModelSim automatic simulation macros
  • Tests with reference responses
  • Technical documentation
  • Installation notes
  • HDL core specification
  • Datasheet
  • Synthesis scripts
  • Example application
  • Technical support
  • IP Core implementation support
  • 3 months maintenance
  • Delivery the IP Core updates, minor and major versions changes
  • Delivery the documentation updates
  • Phone & email support
  • Tech Specs

Please fill in the form below

T2M's range of high quality pre-verified, analog/mixed-signal, RF, Digital and SW system solutions, are used as critical building blocks of communications, consumer and computer products including IoT, Wearables, cellular, tablet, M2M, RCU, set-top boxes, TVs, DVD players and PC chipsets. IPs can be modified to meet the customer's specific requirement be it fab/node porting or proprietary features.