SoC White Box IPs

ZigBee Sub1 Ghz 802.15.4 RF IP

OverviewFeaturesRequest Datasheet

Description

This IP is a fully integrated system-on-chip radio transceiver targeting Smart Grid applications. The performance is tailored for extremely low power operation to be used in sensor monitoring networks and remote control for wireless networks. Transmitter output power ranges from -8 to +15 dBm, while receiver sensitivity is -110 dBm at 25kbps data rate.

Additional peripherals such as ADC, SPI, I2C, UART, I2S and timers are all included on the same chip, resulting in a compact system solution.This is ideal for portable applications in frequency ranges 863-928 MHz , in particular those needing long battery life and/or signal processing, such as AMR, WSN and medical.

Features

  • Ultra-low power 863-928 MHz transceiver
  • Low voltage operation from 3.6 V down to 1.0? V
  • Minimum current standby mode with RTC based on 32 ?kiHz crystal oscillator: 1? µA at 37?°C
  • Low continuous Rx current: 3.5 mA (1 ?V)
  • RF data rate up to 400 kb/s
  • Rx sensitivity -110 dBm at 25 kb/s in FSK modulation, -115 dBm at 2 kb/s in OOK modulation
  • Digital RSSI: 3 dB/step from noise level up to -30 dBm
  • Flexible modulation: FSK, OOK, 2-FSK, 4-FSK, QPSK
  • 16/32-bit DSP/CPU, 120 µA/MHz, dual MAC
  • Software development kit: gcc, gdb, ISS, Eclipse
  • 96 kiB low leakage SRAM (program and data)
  • Integrated ADC (10 kS/s), power management, LED current sources
  • Standard digital interfaces: SPI, UART, I2C, I2S and GPIO
  • ETSI EN300-220 V2.2.2 and FCC part 15.247 and 15.249 compliant
  • Applications

  • Automatic Meter Reading (AMR)
  • Wireless Sensor Networks (WSN)
  • Medical and Body Area Networks (BAN)
  • Home automation
  • Deliverables

  • Samples and evaluation kits are available
  • Packaging options: bare die or QFN
  • Derivatives custom requirements

Please fill in the form below

T2M's range of high quality pre-verified, analog/mixed-signal, RF, Digital and SW system solutions, are used as critical building blocks of communications, consumer and computer products including IoT, Wearables, cellular, tablet, M2M, RCU, set-top boxes, TVs, DVD players and PC chipsets. IPs can be modified to meet the customer's specific requirement be it fab/node porting or proprietary features.