Select Language

Your Complex IP Core Partner

    Display Port v1.4 Rx PHY & Controller IP

    OverviewFeaturesRequest Datasheet

    Display port 1.4 Rx IP supports Channel bandwidth Up to 5.4bps per channel (HBR2), Programmable analog characteristics like CDR Bandwidth, Equalizer strength, Terminator resistor, BGR voltage also covers the Testability like PLL only test, Analog signal monitor.

       

    Related Links: Design & Reuse | ChipEstimate | Anysilicon

     
    • DisplayPort version 1.4 compliant receiver
    • PHY supports 1.62Gbps (RBR) to 5.4Gbps (HBR2) bit rate
    • Integrated 100-ohm termination resistors with common-mode biasing
    • Integrated equalizer with tunable strength
    • eDP version 1.4a / DP version 1.3 compliant
    • receiver Supports HDCP1.4 and HDCP2.2(Optional)
    • Consists of configurable (4/2/1) link channels and one AUX channel
    • Supports 1.62Gbps (RBR), 5.4Gbps (HBR2) and 8.1 Gbps (HBR3) bit rate
    • Supports main link operation with 1 or 2 or 4 lanes Supports both Default and Enhanced Framing Mode Supports SST mode
    • Supports video packet and audio packet
    • Supports 18 / 24 bit RGB digital video output format Master I2C interface for DDC connection
    • Interface to external HDCP key storage
    • Configuration registers programmable via AMBA interface
    • Configurable analog characteristics
    • CDR bandwidth
    • Equalizer strength
    • Terminator resistance
    • BGR voltage
    • Regulator voltage
    • Support PLL test and internal analog signal monitor
    • 1.8V/0.9V power supply
    Deliverables
    • Verilog RTL or netlist source code of LINK controller.
    • Abstracted timing models for synthesis and STA
    • Timing constrains for synthesis and physical layout
    • Behavioral Verilog Model, simulation test bench, run control scripts, and test stimuli
    • Physical design database
    • Integration guidelines
    • Reference software sample code

      Fill the form below, to receive the product datasheet in your inbox