Select Language

Your Complex IP Core Partner

    HDMI v2.0 Rx PHY & Controller IP

    OverviewFeaturesRequest Datasheet

    This HDMI 2.O Rx IP provides a complete HDMI receiver function and complies with HDMI specification version 2.0b. It consists of two modules, a physical layer (PHY) and a link module. The PHY is upper compatible with DVI receiver and implemented as a hard IP based on TSMC 28HPC+ CMOS logic process, while the link module is implemented as a synthesizable soft IP. Built-in High-bandwidth Digital Content Protection (HDCP) cipher protects the transmission of audiovisual content.


    LINK Specifications Supported HDMI standard:

    • HDMI 2.0b / HDMI 1.4b with HDR packet supported
    • Supported HDCP HDCP 2.2 / HDCP 1.4
    • Supported Video formats:
    • 3D formats with Frame Packing/Side by Side Half/Top & Bottom
    • Compliant with EIA/CEA-861F / VESA DMT
    • Deep Color 24bit, 30bit, 36bit supported
    • Supported Audio format
    • Standard S/PDIF for stereo and compressed audio up to 192Khz
    • PCM, Dolby digital, DTS digital audio output through 4bit I2S up to 8 channels
    • Super Audio CD 1bit audio format
    • High-Bit-Rate compressed audio formats
    • IEC60958 or IEC61937 compatible
    • Color Space Conversion:
    • ITU-R BT601/709/2020 NonConst/RGB Full/RGB Limit/xvYCC
    • YCbCr422/YCbCr444/RGB to YCbCr420
    • Host interface:
    • AMBA APB v2.0 32bit / I2C interface
    • Size: (Undisclosed)
    • PHY Specifications
    • Channel bandwidth:
    • 250Mbps ~ 6.0Gbps per channel
    • Programmable analog characteristics:
    • PLL band width
    • VCO gain
    • BGR voltage
    • Testability:
    • Loop-back test
    • PLL only test
    • Built-Out-Self-Test
    • Under NDA
    • Process: TSMC 28 HPC+
    • HDMI version 2.0b compliant receive
    • Supports HDCP 2.2/HDCP 1.4
    • Supports CEA-861F/VESA DMT up to 4K2K
    • Supports 3D formats (Frame packing/Side by Side Half/Top & Bottom)
    • Wide range channel speed up to 6.0Gbps
    • Deep Color Mode support at 24, 30, and 36 bit per pixel
    • Programmable color space converter includes BT601/709/2020(NonConst)/RGB/xvYCC,
    • Adjustable analog characteristics
    • Supports I2S, S/PDIF and DSD audios
    • 1.8V/0.9V power supply
    • Support TSMC 12FFC
    • Support TSMC 28HPC+ process
    • Full testability
    • 3D formats with Frame Packing/Side by Side Half/Top & Bottom.

      Fill the form below, to receive the product datasheet in your inbox