Select Language

Your Complex IP Core Partner

    PCIe 5.0 SerDes PHY IP

    OverviewFeaturesRequest Datasheet

    This Peripheral Component Interconnect Express (PCIe) x4 PHY is compliant with PCIe 5.0 Base Specification with support of PIPE 5.1 interface spec. Lower power consumption is achieved due to support of additional PLL control, reference clock control, and embedded power gating control. Also, since a fore mentioned low power mode setting is configurable, the PHY is widely applicable for various scenarios under different consideration of power consumption.

     Compliant with PCIe 5.0 Base Specification  Compliant with PIPE 5.1  Supported data transfer rate: 2.5 GT/s, 5.0 GT/s, 8.0 GT/s, 16.0 GT/s and 32GT/s  Supported physical lane width: x4  Supported parallel interface: 16/32- bit(Gen4/5), 10/20-bit(Gen1/2/3)  Support dual-port PLL with LC tanks  Support CC/SRIS/SRNS  Support SSC for EMI reduction  DFE+CTLE for RX-EQ training  3-tap FFE for TX preset  Power-gated for lowest leakage in L1.2 low power mode(PMA)  Auto power saving for short reach  TSMC 12nm FFC 1P10M (ULVT/SVT) process  Operating Voltage: 0.8V and 1.2V  Built-in EYE-monitor and EYE checker   Deliverables  Application Note / User Manual  Behavior model, and protected RTL codes  Protected post layout netlist and Standard Delay Format (SDF)  Synopsys library (LIB)  Frame view (LEF)  Metal GDS (GDSII)  Test patterns and Test Documentation

      Fill the form below, to receive the product datasheet in your inbox