Your Complex IP Core Partner

    USB 3.0/ PCIe 2.0 Combo PHY IP

    OverviewFeaturesRequest Datasheet

    The Combo PHY is a complete USB3.0 and PCIe 2.0 PHY IP solutoin designed for a mobile and data consumer applications in TSMC 28nm process. It supports both USB3.0 (1 or 2 ports) and PCIe 2.0 (1 lane). It consists of Physical Coding Sublayer and Physical Media Attachment and includes all circuitry for interface operation with 8/10 encoding/decoding, driver, input buffers, PLL and impedance matching circuitry. The PHY provides standard PIPE interface with the Media Access Layer for exchanging information. Lower power consumption is achieved due to support of additional PLL control, reference clock control, and embedded power gating control. Also, since aforementioned low power mode setting is configurable, the PHY is widely applicable for various scenarios under different consideration of power consumption.

      USB-3.0-PCIe-2.0-Combo-PHY-silicon-ip-core-supplier-in-europe  
    t2m-design-reuse t2m-chipestimate t2m-anysilicon
     
    • Standard PHY interface (PIPE) enables multiple IP sources for PCIe/USB3 MAC layer
    • Supports 2.5GT/s and 5.0GT/s serial data transmission rate
    • Supports 16-bit or 32-bit parallel interface
    • Data and clock recovery from serial stream
    • 8b/10b encoder/decoder and error indication
    • Support direct disparity control for use in transmitting compliance pattern in Pole mode
    • Support power change and rate change at a same PCLK edge in PCIe mode
    • Tunable Receiver detection to detect worse case cables
    • Beacon transmission and reception in Pole mode
    • Low Frequency Periodic Signaling (LFPS) transmission and reception in USB3.0 mode
    • Support SSCG function to reduce EMI effects with tunable down spread amplitude
    • Selectable TX margining, Tx de-emphasis and signal swing values
    • Internal Loopback Test Capable
    • Allowable analog circuit parameter adjustment and internal test control
    • Compliant with USB3/PCIe base specification
    Deliverables
    • GDSII & layer map
    • Place-Route views (.LEF)
    • Liberty library (.lib)
    • Verilog behavior model
    • Netlist & SDF timing
    • Layout guidelines, application notes
    • LVS/DRC verification reports
    Benefits
    • USB 3.0 SuperSpeed
    • High-performance backplane interconnect
    • Supports PCIe base specifications
    • Supports USB base specifications
    Applications
    • PC
    • Television
    • Data storage
    • Multimedia Devices
    • Recorders
    • Mobile devices

      Fill the form below, to receive the product datasheet in your inbox