Production Proven, Complex Semiconductor IP Cores

IP Cores


T2M eDisplayPort v1.4 Tx PHY IP

eDisplayPort v1.4 Tx PHY IP

Description and Features

eDP/DP Tx PHY is designed for chips that perform eDP/DP data communication while operating at low power consumption. The main link is a multi-gigabit transmitter macro which enable speed up to 4.0Gbps data transmitter with optimized power and die size, also it can be easily fabricated and implemented in a video system. The AUX channel is a half-duplex, bidirectional channel consisting of one differential pair, supporting the bit rate of about 1Mbps.

Macro consists of multi-main link transmitter channels, AUX channel, one PLL and bias-gen unit. The main link transmitter performs dedicated P2S, clock generator, driver with pre-emphasis and self-test. Each of the channels can be turned off individually.

Features
  • Support data rate of main link : 0.6Gbps~4.0Gbps
  • Utilize per-lane 10/20bit parallel interface for main link
  • Support Spread Spectrum clock generation: -
  • 5000ppm@31.5KHz
  • AC coupling
  • One shared PLL for all the lanes
  • Individual power down for each lane
  • Support 0~9dB programmable 2-tap FFE (feed forward equalization) for main link
  • AUX channel included
  •  Embedded BIST
  • Support wire bonding and flip chip package
  • Reliability
  • Life Time : 10 years, with Average
  • Temperature up to 110 degC
  • Availability : 100%
  • ESD (HBM) : over 2000V

Deliverables

  • GDSII & layer map
  • Place-Route views (.LEF)
  • Liberty library (.lib)
  • Verilog behaviour model
  • Netlist & SDF timing
  • Layout guidelines, application notes
  • LVS/DRC verification reports