Select Language

Your Complex IP Core Partner

    LPDDR5X Controller IP

    OverviewFeaturesRequest Datasheet
    LPDDR5X is full-featured, easy-to-use, synthesizable design, compatible with LPDDR5X draft JEDEC specification, JESD209-5B specification and DFIversion 5.0 specification Compliant. Through its LPDDR5X compatibility, it provides a simple interface to a wide range of low-cost devices. LPDDR5X Controller IP is proven in FPGA environment. The host interface of the LPDDR5X can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol. LPDDR5X-Controller-silicon-proven-ip-provider-in-china Related Links: Design & Reuse | ChipEstimate | Anysilicon
    • Supports LPDDR5X protocol draft JEDEC Specification.
    • Compliant with DFI version 5.0 Specification.
    • Supports up to 16 AXI ports with data width upto 512 bits.
    • Supports controllable outstanding transactions for AXI write and read channels
    • Supports in port arbitration and multi-port arbitration.
    • Supports user programmable page policy. • Closed page policy • Open page policy
    • Supports Error Checking and correction (ECC).
    • Supports retry on ECC error, with retry limit user controllable.
    • Supports high clock speeds in ASIC and FPGA.
    • Supports low latency for write and read path.
    • Supports reordering of transactions for higher performance.
    • Supports up to 32GB device density.
    • Supports X8 and X16 devices.
    • Supports all speed grades as per specification.
    • Supports system ECC function.
    • Supports Mode registers programming.
    • Supports programmable write latency and read latency.
    • Supports programmable burst length of 16 and 32.
    • Supports Read DBI and Write DBI operation.
    • Supports Multiple Outstanding transaction.
    • Supports In-port Arbitration using QoS.
    • Supports WCK2CK Sync operation.
    • Supports for WCK Control.
    • Supports 2:1 and 4:1 Clock Ratio Modes.
    • Supports CRC and ECC for Write and Read Operations.
    • Supports Command Address Parity features.
    • Supports Write data mask operation.
    • Supports Deep Sleep mode.
    • Supports for Self-Refresh operation and Power Down mode.
    • Supports 1:4 Controller to DFI PHY frequency ratio.
    • Supports Programmable clock frequency operation.
    • Supports Frequency Set point operation.
    • Simple interface allows easy connection to Microprocessor/Microcontroller devices.
    • Built in self-test to test all locations in memory to identify damaged locations.
    • The LPDDR5X interface is available in Source and netlist products.
    • The Source product is delivered in Verilog. If needed VHDL, SystemC code can also be provided.
    • Easy to use Verilog Test Environment with Verilog Testcases.
    • Lint, CDC, Synthesis, Simulation Scripts with waiver files.
    • IP-XACT RDL generated address map.
    • Firmware code and Linux driver package.
    • Documentation contains User's Guide and Release notes.

      Fill the form below, to receive the product datasheet in your inbox