Production Proven, Complex Semiconductor IP Cores

IP Cores

T2M Peripherals JESD204C Tx Controller IP

JESD204C Tx Controller IP

Description and Features

JESD204C interface provides full support for the JESD204C synchronous serial interface, compatible with JESD204C version specification. Through its compatibility, it provides a simple interface to a wide range of low-cost devices. JESD204C Transmitter IP is proven in FPGA environment. The host interface of the JESD204C can be simple interface or can be AHB, AHB-Lite, APB, AXI, AXILite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol. JESD204C Transmitter IP is supported natively in Verilog and VHDL



  • Compliant with JESD204 specification JESD204A, JESD204B.01 and JESD204C.
  • Full JESD204C transmit functionality.
  • Supports data rate upto 32 Gbps.
  • Supports programmable clock frequency up to 32 GHz.
  • Supports up to Subclass 0, 1, 2.
  • Supports up to Version A, B and C.
  • Supports 1 to 8 lanes.
  • Supports 1 to 8 converters per transmitter.
  • Supports frame sizes of 1,2,4,8 and 16 octets per frame.
  • Supports HD-mode.
  • Supports 1 to 32 bit data width per converter.
  • Supports CF = 0 and 1 control words per frame clock period per link.
  • Supports 0 to 3 control bits per sample.
  • Supports 1 to 8 samples per converter.
  • Supports 1 to 32 frames per multiframe.
  • Supports 4, 8, 12, 16, 20, 24, 28 and 32 bits per sample.
  • Supports 0 to 15 bank ID – extension to DID.
  • Supports 0 to 255 device identification number.
  • Supports 0 to 7 lane identification number.
  • Supports 8b/10b encoding.
  • Supports 64b/66b encoding.
  • Supports 64b/80b encoding.
  • Supports Forward Error Correction (FEC) and cyclic redundancy checks (CRC).
  • Supports single block, Multi block and extended multi block.
  • Supports different Serdes interfaces 10,20,40,60 bits and custom bits per lane.
  • Continuous sequence of a scrambled jitter pattern (JSPAT) and modified random pattern (modified RPAT).
  • Continuous sequence of either /D21.5/ or /K28.5/ characters for code group synchronization.
  • Scrambler can be enabled or disabled.
  • MCDA-ML (Multiple-Converter Device Alignment, Multiple-Lanes) device supported.


  • The JESD204C Transmitter interface is available in Source and netlist products.
  • The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
  • Easy to use Verilog Test Environment with Verilog Testcases.
  • Lint, CDC, Synthesis, Simulation Scripts with waiver files.
  • IP-XACT RDL generated address map.
  • Firmware code and Linux driver package.
  • Documentation contains User's Guide and Release notes.