SoC White Box IPs

Schedule a meeting

USB2.0 Host Controller

OverviewFeaturesRequest Datasheet

The USB2.0 host controller is a highly integrated and cost-effective IP that contains a USB2.0 PHY, the USB2.0 PHY is used for High-Speed (HS), Full-Speed (FS), and Low-Speed (LS) transfers. Following the trend of green technology design, low power technique is also implemented in this IP

           
   
  • USB2.0 Host Controller :
  • One/Two downstream USB ports for High-Speed (HS) / Full-Speed (
  • FS) / Low-Speed (LS) host mode
  • One EHCI USB2.0 Host Controller for HS data transfer, compliant
  • with EHCI Specification Rev 1.1
  • One OHCI USB1.1 Host Controller for FS/LS data transfer,
  • compliant with OHCI Specification Rev 1.0a
  • USB2.0 PHY :
  • Compliant with USB 2.0 specification, Revision 2.0
  • Supports High-Speed (480Mbps), Full-Speed (12Mbps) and Low-
  • Speed (1.5Mbps) serial data rates
  • Embedded 45ohm High-Speed termination, 1.5kohm Full-Speed
  • device pull-up resistor, 15kohm pull-down resistors
  • Embedded Phase-Locked Loop (PLL) for 480MHz High-Speed USB
  • operations
  • Embedded internal RREF for reference current trimming function
  • Embedded HV protection circuit
Fill the form below, to receive the product datasheet in your inbox