Your Complex IP Core Partner

    Ethernet 800G MAC IP

    OverviewFeaturesRequest Datasheet

    Ethernet 800G MAC core is compliant with IEEE Standard 802.3.2018 Ethernet specification. Through its Ethernet compatibility, it provides a simple interface to a wide range of low-cost devices. Ethernet 10G MAC IP is proven in FPGA environment. It can also support a variety of host bus interfaces for easy adoption into any design architecture - AHB, AHB-Lite, APB, AXI, AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or custom buses.

    Ethernet-800G-MAC-silicon-proven-ip-provider-in-china

    Related Links: Design & Reuse | ChipEstimate | Anysilicon

    • Compliant with IEEE Standard 802.3-2018 specification
    • Supports full duplex mode of operation
    • Supports Standard 800Gbps Ethernet link layer data
    • Supports 1024-bit CDMII interface
    • Supports Programmable Inter Packet Gap (IPG) and Preamble length
    • Supports MDIO (Clause 22 and Clause 45) Interface
    • Supports start control character alignment
    • Provides detailed statistics as per the specification
    • Supports Jumbo Frame
    • Supports Loopback functionality
    • Supports transmit and receive FIFO interface
    • Supports FCS(CRC) transmission and reception
    • Supports Pause frame-based flow control
    • Supports IEEE Standard 802.3az Energy Efficient Ethernet (EEE)
    • Supports IEEE Standard 802.1Q and IEEE Standard 802.1ad VLAN
    • Optional Wake-on-LAN support
    • In house UNH compliance tested
    • Optional support for TCP/IP offload
    • Optional support for IEEE Standard 1588-2008 PTP
    • Optional support for DMA on both transmits and receive side
    • Fully synthesizable
    • Static synchronous design
    • Positive edge clocking and no internal tri-states
    • Scan test ready
    • Simple interface allows easy connection to microprocessor/microcontroller devices
    Benefits
    • Single Site license option is provided to companies designing in a single site.
    • Multi Sites license option is provided to companies designing in multiple sites.
    • Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
    • Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.
    Deliverables
    • The Ethernet interface is available in Source and netlist products.
    • The Source product is delivered in plain text Verilog. If needed VHDL, SystemC code can also be provided.
    • Easy to use Verilog Test Environment with Verilog Testcases
    • Lint, CDC, Synthesis, Simulation Scripts with waiver files
    • IP-XACT RDL generated address map
    • Firmware code and Linux driver package
    • Documentation contains User's Guide and Release notes.
     

      Fill the form below, to receive the product datasheet in your inbox