The logic required to create and validate designs for diverse applications is provided by HDMI Transmitter (TX) IP solutions, which are compliant with the HDMI 2.0 and 1.4 requirements. The silicon-tested, powerand area-optimized IP solutions come with a variety of programmable digital controllers and high-speed mixed-signal PHY IP. The IP solutions ensure the highest level of content protection across the HDMI 2.0 interface or ultra-high definition multimedia SoCs by being HDMI 2.0 and HDCP 2.2 certified with embedded security modules.
HDMI version 2.0b compliant transmitter
Supports CEA-861F/VESA DMT up to 4K2K resolution@60fps
Supports 3D formats (Frame packing/Side by Side Half/Top & Bottom)
Wide range channel speed up to 6.0Gbps
Deep Color Mode support at 24, 30, and 36 bit per pixel
Supports HDR packets
Programmable color space converter includes BT601/709/2020(NonConst)/RGB/xvYCC
Adjustable analog characteristics Output swing voltage
PLL band width
VCO gain BGR voltage
Support Built-in Scan Test & Loop-back Test
1.8V/0.9V power supply
PHY Specifications :
Channel bandwidth: 250Mbps~ 6.0Gbps per channel
Programmable analog characteristics:
Output swing voltage
Pre-emphasis strength
PLL band width, VCO gain, BGR voltage
Testability:
Loop-back test, PLL only test, Built-In-Self-Test
Link Specifications :
Supported HDMI standard:
HDMI-2.0b (HDMI-1.4b), HDCP 2.2 / HDCP 1.4
Supported Video formats:
3D formats with Frame Packing/Side by Side Half/Top & Bottom
Compliant with EIA/CEA-861F / VESA DMT
Deep Color: 24bit, 30bit, 36bit supported
Supported Audio formats:
Standard S/PDIF for stereo and compressed audio up to 192Khz
PCM, Dolby digital, DTS digital audio transmission through 4bit I2S up to 8 channels
High-Bit-Rate compressed audio formats
IEC60958 or IEC61937 compatible
Support HDR Packets:
Colour Space Conversion:
ITU-R BT601/709/2020 NonConst/RGB Full/RGB Limit/xvYCC
Host interface:
AMBA APB v2.0 32bit / I2C interface
Silicon Proven in ST 28FDSOI
Deliverables
RTL Code
GDS2
Documentations included Link and PHY specifications
SoC integration guidelines
Board level design guidelines to pass HDMI certification
Benefits
Optimized for low power and small area
Silicon-proven High-Definition Multimedia Interface (HDMI) TX IP includes PHY and controllers
HDMI 2.0 and HDCP 2.2 certified
Support for key HDMI 2.0 features such as 4K x 2K resolution at 60 Hz frame
Fully compliant with HDMI 2.0/1.4 specifications with all required features