Description
The HDMI receiver PHY (Physical layer), a single-port IP core, complies fully with HDMI 1.4's requirements. This HDMI RX PHY supports TMDS speeds between 25MHz and 225MHz and offers a simple system LSI solution for consumer electronics like HDTV. The HDMI receiver PHY operates most effectively with the HMDI receiver link IP core. The following Fab/Nodes have all been Silicon Proven: (TSMC, UMC, SMIC, GF, Samsung, STMicro). Link Controller for an HDMI receiver that adheres to HDMI 1.4a specifications to the letter. For consumer electronics like HD-TVs and AV receivers, this offers a simple system on chip (SOC) implementation. When used with our complementing HMDI receiver PHY IP core, it performs best. Depending on requirements, the basic functionality of HDMI can be modified.
Features
-
HDMI version 1.4 compliant receiver
-
Supports DTV from 480i to 1080i/p HD resolution
-
Supports 24bit, 30bit and 36bit color depth per pixel
-
HDMI version 1.4a, HDCP revision 1.3 and DVI version 1.0 compliant receiver
-
Supports DTV from 480i to 1080i/p HD resolution, and PC from VGA to UXGA
-
Supports 3D video format specified in HDMI 1.4a specification
-
Programmable 2-way color space converter
-
Compliant with EIA/CEA-861D
-
Deep color supported up to 16bit per pixel
-
xvYCC Enhanced Colorimetry
-
All packet reception including Gamut Meta data Packet
-
Supports RGB, YCbCr digital video output format including ITU.656
-
24/30/36/48bit RGB/YCbCr 4:4:4
-
16/20/24bit YCbCr 4:2:2
-
8/10/12bit YCbCr 4:2:2 (ITU.601 and 656)
-
48 bit mode is not supported in 1080p
-
Supports standard SPDIF output for stereo or compressed audio up to 192KHz
-
Support PCM, Dolby digital, DTS digital audio output through 4bits I2S up to 8 channel
-
IEC60958 or IEC61937 compatible
-
1bit audio format (Super Audio CD) output
-
High-bitrate compressed audio formats output
-
Slave I2C interface for DDC connection
-
Configuration registers programmable via synchronized parallel interface
-
Interface to external HDCP key storage
-
Integrated cable terminator
-
Adaptive equalizer for cable
-
Adjustable analog characteristics
-
PLL band width
-
VCO gain, BGR voltage
-
Cable terminator resistance value
-
DLL digital filter characteristics
-
Integrated Audio PLL
-
3.3V/2.5V/1.0V power supply
-
Silicon Proven in UMC 65/55ULP
Deliverables
-
Datasheet and Integration guideline
-
GDSII or Phantom GDSII
-
Layer map table
-
CDL netlist for LVS
-
Verilog behavior model
-
Liberty timing model
-
DRC/LVS/ERC results
-
Configurable RTL Code
-
HDL based test bench and behavioral models
-
Test cases
-
Configurable synthesis shell
-
Documentation
-
Design Guide
-
Verification Guide
-
Synthesis Guide
Benefits
-
Very Low power
-
Small Area, easy to integrate
-
Test chip and Test board available
Applications
-
Digital TV
-
Tablets
-
Mobile phones
-
Digital camera
-
Camcorders
-
Soundbars
-
Audio/Video Receivers
-
DVD players
-
Recorders
-
Streaming-media players
-
Set-top boxes
-
Home theater systems
-
Game consoles