MIPI CSI Transmitter is used in mobile and high–speed serial applications where a camera can send the video data using it over MIPI lines to the MIPI CSI Receiver for decoding the data and use it for subsequent processing. MIPI CSI Transmitter adheres to MIPI CSI Specification. The MIPI CSI Transmitter along with MIPI DPHY provides a complete solution for encoding MIPI data. The MIPI CSI-2 Receiver, along with MIPI CSI-2 transmitter and MIPI DPHY/CPHY, provides a complete solution for MIPI CSI-2 communication.
Compliant with MIPI CSI-2 Specification v1.1
Complaint with MIPI DPHY v1.1
Programmable 1, 2 or 4 Data Lane Configuration
Operate in continuous and non-continuous clock modes.
Supported YUV Data Types: YUV420_8bit, YUV420_10bit, YUV422_8Bit,
YUV422_10bit, YUV420_8Bit_CSPS, YUV420_10bit_CSPS, and LEGACY
Supported RGB Data Types: RGB888, RGB565, RGB666, RGB555, and
Supported RAW Data Types: RAW6, RAW7, RAW8, RAW10, RAW12, RAW14
Supported Generic Short Packets, Embedded Data type
Supports User defined data types: 8 bit format
Camera Interface: 64 bits per pixel. Multiple pixels per pixel clock.
Supports VC interleaving
Supports Lane mapping
Data Rate Up to 1.5 Gbps per lane
Selectable register for line counter inoperative or increment by 1
Selectable Register configuration through CCI interface or APB interface
Configurable RTL Code
HDL-based test bench and behavioral models
Protocol checkers, bus watchers, and performance monitors