Display port 1.4 Rx IP supports Channel bandwidth Up to 5.4bps per channel (HBR2), Programmable analog characteristics like CDR Bandwidth, Equalizer strength, Terminator resistor, BGR voltage also covers the Testability like PLL only test, Analog signal monitor.
DisplayPort version 1.4 compliant receiver
PHY supports 1.62Gbps (RBR) to 5.4Gbps (HBR2) bit rate
Integrated 100-ohm termination resistors with common-mode biasing
Integrated equalizer with tunable strength
eDP version 1.4a / DP version 1.3 compliant
receiver Supports HDCP1.4 and HDCP2.2(Optional)
Consists of configurable (4/2/1) link channels and one AUX channel
Supports 1.62Gbps (RBR), 5.4Gbps (HBR2) and 8.1 Gbps (HBR3) bit rate
Supports main link operation with 1 or 2 or 4 lanes Supports both Default and Enhanced Framing Mode Supports SST mode
Supports video packet and audio packet
Supports 18 / 24 bit RGB digital video output format Master I2C interface for DDC connection
Interface to external HDCP key storage
Configuration registers programmable via AMBA interface
Configurable analog characteristics
CDR bandwidth
Equalizer strength
Terminator resistance
BGR voltage
Regulator voltage
Support PLL test and internal analog signal monitor
1.8V/0.9V power supply
Silicon Proven in TSMC 28nm HPC+
Deliverables
Verilog RTL or netlist source code of LINK controller.
Abstracted timing models for synthesis and STA
Timing constrains for synthesis and physical layout
Behavioral Verilog Model, simulation test bench, run control scripts, and test stimuli
Physical design database
Integration guidelines
Reference software sample code
