Production Proven, Complex Semiconductor IP Cores

Semiconductor IP Cores


T2M Ethernet GbE (10/100/1000 Base-T) PHY IP in 28HKMG

GbE (10/100/1000 Base-T) PHY IP in 28HKMG

Description

The GPHY is a highly integrated single chip for Giga 10/100/1000 Ethernet applications with minimal power consumption. It is capable of operating in 10BASE-T, 100BASE-TX, and 1000BASE-T. This GPHY links the GMII-based Media Access Control Layer (MAC) (Giga Media Independent Interface). This GPHY uses either RGMII or GMII to connect to the Media Access Control Layer (MAC). For 100BASE-TX Fast Ethernet and 1000BASE-T Giga Ethernet, it may support Unshielded Twisted Pair Category 5 Cable (UTP5), or UTP5/UTP3 cable for 10BASE-T Ethernet. It includes the Physical Coding Sub-layer (PCS), Physical Medium Attachment Layer (PMA), Twisted Pair Physical Medium Dependent Sub-layer, and the whole physical layer function of 100BASE-TX described by IEEE802.3u and 1000BASE-T specified by IEEE802.3ab (TP-PMD, 100BASE-TX only).

Features
  • IEEE 802.3-2008, IEEE 802.3az fully standards compliant

  • IEEE 1588-2008 support

  • BroadR-Reach™ support

  • Dual port MAC interface:

  • - GMII (10/100/1000BASE-T)

  • - MII (10/100BASE-T).

  • Auto-negotiation support

  • Automatic detection and correction of pair swaps (Auto-MDIX), pair skew and pair polarity

  • 6 different operating modes:

  • - 1000BASE-T Full Duplex and Half Duplex

  • - 100BASE-TX Full Duplex and Half Duplex

  • - 10BASE-T Full Duplex and Half Duplex

  • Management interface

  • Baseline wander compensation

  • On-chip transmit wave-shaping

  • On-chip hybrid circuit

  • 10KB jumbo frames

  • Internal, external and remote loop back

  • Hardware configuration for default operation

  • Power down mode, interrupt support

  • IEEE 1500 support for SoC testing integration

  • LED indication: link mode, status, speed, activity and collision

  • Silicon Proven in SMIC 28nm HKMG

Deliverables

  • Detailed Product Specifications

  • Verilog Behavioral Model (A) for Simulated Analysis

  • Liberty Database (.db/.lib) for Synthesis, Timing Analysis, and Equivalence Verification

  • CTL/CTLDB Implementation for Design for Test (DFT)

  • SPF (STIL Procedure File) for Automatic Test Pattern Generation (ATPG)

  • LEF Files for Automatic Place and Route (APR)

  • CDL for Layout Versus Schematic (LVS) Connectivity Validation