SoC White Box IPs

Schedule a meeting

HDMI 2.0 Rx PHY & Controller IP

OverviewFeaturesRequest Datasheet

This HDMI 2.O Rx IP provides a complete HDMI receiver function and complies with HDMI specification version 2.0b. It consists of two modules, a physical layer (PHY) and a link module. The PHY is upper compatible with DVI receiver and implemented as a hard IP based on TSMC 28HPC+ & TSMC 12FFC CMOS logic process, while the link module is implemented as a synthesizable soft IP. Built-in High-bandwidth Digital Content Protection (HDCP) cipher protects the transmission of audiovisual content.


LINK Specifications Supported HDMI standard:

  • HDMI 2.0b / HDMI 1.4b with HDR packet supported
  • Supported HDCP HDCP 2.2 / HDCP 1.4
  • Supported Video formats:
  • 3D formats with Frame Packing/Side by Side Half/Top & Bottom
  • Compliant with EIA/CEA-861F / VESA DMT
  • Deep Color 24bit, 30bit, 36bit supported
  • Supported Audio format
  • Standard S/PDIF for stereo and compressed audio up to 192Khz
  • PCM, Dolby digital, DTS digital audio output through 4bit I2S up to 8 channels
  • Super Audio CD 1bit audio format
  • High-Bit-Rate compressed audio formats
  • IEC60958 or IEC61937 compatible
  • Color Space Conversion:
  • ITU-R BT601/709/2020 NonConst/RGB Full/RGB Limit/xvYCC
  • YCbCr422/YCbCr444/RGB to YCbCr420
  • Host interface:
  • AMBA APB v2.0 32bit / I2C interface
  • Size: (Undisclosed)
  • PHY Specifications
  • Channel bandwidth:
  • 250Mbps ~ 6.0Gbps per channel
  • Programmable analog characteristics:
  • PLL band width
  • VCO gain
  • BGR voltage
  • Testability:
  • Loop-back test
  • PLL only test
  • Built-Out-Self-Test
  • Under NDA
  • Process: TSMC 28 HPC+, TSMC 12FFC
  • HDMI version 2.0b compliant receive
  • Supports HDCP 2.2/HDCP 1.4
  • Supports CEA-861F/VESA DMT up to 4K2K
  • Supports 3D formats (Frame packing/Side by Side Half/Top & Bottom)
  • Wide range channel speed up to 6.0Gbps
  • Deep Color Mode support at 24, 30, and 36 bit per pixel
  • Programmable color space converter includes BT601/709/2020(NonConst)/RGB/xvYCC,
  • Adjustable analog characteristics
  • Supports I2S, S/PDIF and DSD audios
  • 1.8V/0.9V power supply
  • Support TSMC 12FFC
  • Support TSMC 28HPC+
  • Full testability
  • 3D formats with Frame Packing/Side by Side Half/Top & Bottom.
Fill the form below, to receive the product datasheet in your inbox