SoC White Box IPs

    Schedule a meeting

    HDMI 2.0 Tx PHY & Controller IP

    OverviewFeaturesRequest Datasheet

    This HDMI 2.0 Tx IP provides a complete HDMI transmitter function and complies with HDMI specification version 2.0b. It consists of two modules, a physical layer (PHY) and a link module. The PHY is upper compatible with DVI receiver and implemented as a hard IP based on TSMC 12FFC, TSMC 28HPC+ while the link module is implemented as a synthesizable soft IP. Built-in High-bandwidth Digital Content Protection (HDCP) cipher protects the transmission of audiovisual content.

      hdmi-2.0-tx-phy-and-controller  

    Link Specifications Supported HDMI standard:

    • HDMI-2.0b (HDMI-1.4b), HDCP 2.2 / HDCP 1.4
    • Supported Video formats: 3D formats with Frame Packing/Side by Side Half/Top & Bottom, Compliant with EIA/CEA-861F / VESA DMT
    • Deep Color: 24bit, 30bit, 36bit supported
    • Supported Audio formats: Standard S/PDIF for stereo and compressed audio up to 192Khz, PCM, Dolby digital, DTS digital audio transmission through 4bit I2S up to 8 channels, High-Bit-Rate compressed audio formats, IEC60958 or IEC61937 compatible
    • Support HDR Packets:
    • Colour Space Conversion: ITU-R BT601/709/2020 NonConst/RGB Full/RGB Limit/xvYCC, YCbCr422/YCbCr444/RGB to YCbCr420
    • Host interface: AMBA APB v2.0 32bit / I2C interface

    PHY Specifications

    • Channel bandwidth: 250Mbps~ 6.0Gbps per channel
    • Programmable analog characteristics: Output swing voltage, Pre-emphasis strength, PLL band width, VCO gain, BGR voltage
    • Testability: Loop-back test, PLL only test, Built-In-Self-Test
    • Process: TSMC28HPC+, TSMC 12FFC
    • HDMI version 2.0b compliant transmitter
    • Supports CEA-861F/VESA DMT up to 4K2K resolution@60fps
    • Supports 3D formats (Frame packing/Side by Side Half/Top & Bottom)
    • Wide range channel speed up to 6.0Gbps
    • Deep Color Mode support at 24, 30, and 36 bit per pixel
    • Supports HDR packets
    • Programmable color space converter includes BT601/709/2020(NonConst)/RGB/xvYCC,
    • Adjustable analog characteristics Output swing voltage : PLL band width, VCO gain, BGR voltage
    • Analog Monitor Port to probe internal analog nodes
    • Support Built-in Scan Test & Loop-back Test
    • 1.8V/0.9V power supply
    • Support TSMC 12FFC
    • Support TSMC28HPC+ process
     

      Fill the form below, to receive the product datasheet in your inbox