Production Proven, Complex Semiconductor IP Cores

IP Cores

T2M DDR3L Controller IP

DDR3L Controller IP

Description and Features

DDR3L interface provides full support for the DDR3L interface, compatible with DDR3L protocol standard of 8GB_DDR3L and DFI-version 3.1 or higher Specification Compliant. Through its DDR3L compatibility, it provides a simple interface to a wide range of low-cost devices. DDR3L IP is proven in FPGA environment. The host interface of the DDR3L can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol.



  • Supports DDR3L protocol standard of 8GB_DDR3L.pdf.
  • Compliant with DFI-version 3.1 or higher Specification.
  • Supports up to 8 GB device density.
  • Supports Programmable Write latency and Read latency.
  • Supports On-the-fly for burst length.
  • Supports Programmable burst lengths: 4, 8.
  • Supports for All Mode register programming.
  • Supports 8 internal banks.
  • Supports the following devices • X4 • X8 • X16
  • Supports the following burst order • Sequential • Interleave
  • Supports for Write data Mask.
  • Supports for Power Down features.
  • Supports for input clock stop and frequency change.
  • Supports for DLL.
  • Supports for Write leveling.
  • Supports for automatic self refresh(ASR).
  • Supports for self refresh mode.
  • Supports for Self Refresh Temperature (SRT).
  • Supports for Multipurpose Register.
  • Supports for Nominal and dynamic ODT (On-Die Termination) for data, strobe and mask signals.
  • Supports up to 16 AXI ports with data width up to 512 bits.
  • Supports controllable outstanding transactions for AXI write and read channels
  • Supports in port arbitration and multi-port arbitration.
  • Supports Error Checking and correction (ECC).
  • Supports retry on ECC error, with retry limit user controllable.
  • Supports high clock speeds in ASIC and FPGA.
  • Supports user programmable page policy. • Closed page policy • Open page policy
  • Supports all speed grades as per specification.
  • Supports reordering of transactions for higher performance.
  • Quickly validates the implementation of the DDR3L standard of 8GB_DDR3L.pdf.


  • The DDR3L interface is available in Source and netlist products.
  • The Source product is delivered in Verilog. If needed VHDL, SystemC code can also be provided.
  • Easy to use Verilog Test Environment with Verilog Testcases
  • Lint, CDC, Synthesis, Simulation Scripts with waiver files
  • IP-XACT RDL generated address map
  • Firmware code and Linux driver package
  • Documentation contains User's Guide and Release notes.