Select Language

Your Complex IP Core Partner

    Schedule a meeting

    SDR Gen2 RF IP (100MHz~3.8GHz)

    OverviewFeaturesRequest Datasheet

    This is the 2nd Generation SDR RF IP that supports 2x2 and support the frequency ranging from 100MHz to 3.8 GHz with a support of up to 120MHz Bandwidth. the SDR Gen.2 supports the ADC/DAC with 160/640Msps sampling speed. The Gen.2 RF IP also supports FD-FDD.

    This SDR RF IP family are ultra-low-power radio solutions optimized from IoT and M2M to 5G applications. They integrate all the necessary RF/analog/mixed-signal functions to support radio functions for most standards operating in this frequency range at low-cost and ultra-low-power.

    The receive path (RX) has very high dynamic range and is implemented with direct-conversion architecture without external SAW filter. A direct conversion TX generates low EVM signals to drive the external power amplifier. An integrated Frac-N frequency synthesizers and LO-chains generate the required low phase-noise LO signals for TX and RX mixers. Optional fully integrated power management can be integrated to minimize the module eBOM cost.

    This unique SDR RF IP family support many wireless market standards, including: 5G, Wi-Fi, LTE, NB-IoT, 802.15.4g, 802.11ah, Bluetooth, LORA, GNSS/GPS among others. This ultra-low-power transceiver IP enables Internet-of-Things (IoT) and Machine-to-Machine (M2M) applications.

    The other generation of the SDR RF IP are as follows:

    ● SDR1:  TSMC65, 1x2 300MHz – 2.8GHz, up to 40MHz bandwidth, up to 160/640MSPS ADC/DAC

    ● SDR3: TSMC40, 1x1 100MHz ̴ 2.6GHz, up to 80MSPS ADC/DAC, TDD/HD-FDD, optimized for IoT

    ● SDR4: TSMC22, 200MHz  ̴7.3GHz, (2022 sampling), TDD/FD-FDD

    t2m-design-reuse t2m-chipestimate t2m-anysilicon
    • Frequency Range: 100MHz  - 3.8GHz
    • Supports HD-FDD/TDD modes.
    • Low phase-noise Frac-N synthesizer
    • Fast PLL for frequency hopping
    • Modulation Support: OFDM, QPSK, QAM, OQPSK
    • Transmit power: +23 dBm
    • Integrated DPD to improve Tx power efficiency and linearity.
    • ADC/DAC: 10/12bit SAR 80/160 Msps
    • Integrated LDOs and DC-DC
    • Low Rx. Power: ~ 10mW (w/o LDO mode)
    • Silicon : TSMC 65ULP
    • Power Supply Voltage: VDDH=3.3V
    • VDDL=0.95V (1.2V if internal LDOs are used.)

      Fill the form below, to receive the product datasheet in your inbox