Production Proven, Complex Semiconductor IP Cores

IP Cores


T2M DDR DDR4/ DDR3 Combo PHY IP

DDR4/ DDR3 Combo PHY IP

Description and Features

The DDR4/3 PHY is compatible with JEDEC DDR3 and JEDEC DDR4 SDRAMs, supports a range of DDR3 DRAM speeds from 666Mbps to 2133Mbps and DDR4 DRAM speeds from 1866Mbps to 2400Mbps, and target support x16 DDR3/DDR4 SDRAM components, the design include an analog hard macro (CLK/CMD/ADDR/DQ/DQS) and a synthesizable digital design. It supports software auto training includes read gate, read/write data eye timing, and PHY Vref settings. Supports DDR4/DDR3 SDRAM.

Optimized for high performance, low latency, low area, low power, and ease of integration, the DDR4/3 PHY is provided as a hard DDR PHY that is primarily delivered as GDSII including integrated application-specific DDR4/3 I/Os. Supporting the GDSII-based PHY is the RTL-based PHY. The DDR4/3 PHY includes a DFI 4.0 interface to the memory controller and can be combined with controllers for a complete DDR (Double Data Rate) interface solution

  • DDR 4/3 PHY IP - 2400Mbps (Silicon Proven in UMC 28HPC) Block Diagam

Features
  • Supports DDR4/DDR3 SDRAM
  • DDR4 JEDEC standard 1.2v I/O (POD_12 I/O)
  • DDR3 JEDEC standard 1.5v I/O (SSTL_15-compatible)
  • 16 bits width, Single Channel DDR4/DDR3 SDRAM Interface.
  • 16 bits for per channel, could support 2 x8 bits DDR3
  • Memory Clock up to 600MHz, DFI Clock up to 600MHz.
  • Support DDR3 800/1066/1333/1600/1866/2133Mbps; DDR4 1866/2133/2400Mbps
  • Supports DFI like interface
  • 4-bit pre-fetch architecture
  • DLL Lock for 1200MHz
  • Supports SW DDR training
  • Supports DDR IO loopback test
  • Providing per bit de-skew function
  • Supports DDR3 DLL disable mode (CL6/CWL6)
  • Supports DDR3 CL=6 ~ CL17
  • Supports DDR3 CWL=6, CWL=11
  • Supports DDR3 Burst length 4/8
  • Supports DDR3 DQ write Mask Mode
  • Supports DDR3 Read, Write eye training
  • Supports DDR4 CL=9~ CL30, DDR4 CWL=9~CWL21
  • Supports DDR4 DLL disable mode, Read DBI Mode
  • Supports DDR4 DQ write Mask Mode
  • Supports DDR4 Connectivity Test Mode
  • Supports DDR4 Even parity check Mode
  • Supports DDR4 Read gated training
  • Supports DDR4 Read eye training, Write eye training
  • Supports DDR4 TX/RX Vref training
  • Supports DDR Retention mode
  • Supports DQ TX/RX per-bit deskew
  • Programmable On-die Termination on I/O
  • Programmable data-output drive strength I/O
  • DDR4/DDR3 impedance calibration
  • 0.9V Core Power supply
  • 1.2V DDR4 IO Power supply
  • 1.5V DDR3 IO Power supply
  • Support software DDR training
  • DDR3 training: support RX_GATED training, per-bit de-skew for RX/TXpath, DQ RX eye training and DQ TX eye training
Benefits
  • Low Power
  • Low Area
  • Low Latency
  • JEDEC, the standards body responsible for memory standards has defined and developed DRAM categories such as DDR: DDR, DDR2/3/4 mobile DDR: LPDDR2/3/4 high bandwidth DRAM: HBM, HBM2/2E/3)
  • matching Controller in production
  • supports both 16bits and 32 bits
Applications
  • SSD Controller
  • Digital TV
  • Mobile
  • Multimedia
  • Setup Box
  • Data centers (networking and storage)
  • Servers
  • High-performance computing
  • IOT
  • Surveillance
Deliverables
  • User Manual
  • Behavior model, and protected RTL codes
  • Protected Post layout netlist and Standard
  • Delay Format (SDF)
  • Frame view (LEF)
  • Metal GDS (GDSII)
  • Test patterns and Test Documentation